• Home
  • Latest News
  • Planning a Christmas Shutdown? How to Get Your Steel Parts Ordered Early

Christmas shutdown parts checklist: list parts, get drawings, state material, send one list, add a need-by date - Kaizen Engineering, Oldham

For a lot of factories, process plants and recycling sites, the Christmas shutdown is the one window in the year when lines stop long enough to replace the guards, walkway steelwork, chute sections and wear parts that have been patched up since spring. The work gets planned in November. The parts often get ordered in December, which is when every fabricator is busiest and the calendar is shortest.

If you’re putting together a shutdown list now, here’s how to get the steel parts sorted early so they’re on site before the tools go down.

1. Walk the plant and list what actually needs replacing

Go round with the people who run the machines. The things that usually end up on a shutdown list:

  • Guard panels and covers that are bent, cracked or held on with cable ties
  • Walkway, platform and stair steelwork: treads, toe boards, kick plates, handrail brackets and base plates
  • Chute sections, hopper liners and wear strips that have worn thin
  • Motor, gearbox and sensor brackets that have been welded and re-welded
  • Access and inspection covers, cover plates and folded trays

Write down the location, the quantity and how critical each part is. That one list becomes your quote request.

2. Get drawings, or the next best thing

A DXF, DWG, STEP, IGES or PDF drawing is the quickest route to a quote. If there isn’t one, photos and measurements of the existing part do the job, ideally with a tape measure in shot. We can draw the part up from those and confirm the dimensions with you before anything is cut. Our guide on how to send a drawing for a laser cutting quote covers the simple file fixes that speed things up.

3. Say what each part is made from and what it has to survive

Include the material, thickness and any finish you need. If a part takes a beating from abrasion, such as a chute liner, wear strip or screen plate, it’s worth asking whether a wear steel like Hardox® makes more sense than replacing it in mild steel again. See our recycling and wear parts page for the sort of parts we make. Material certificates can be included if you say so when you send the drawing.

4. Send the whole list in one go

One parts list, one supplier, one quote. Sending everything together means the parts can be programmed and cut as a batch, folded and welded under one roof, and delivered or collected together rather than chased piece by piece from different suppliers.

5. Put the date you need them by on the request

Tell us when the shutdown starts and when you need the parts on site. That’s the date we plan to. Leaving a few working days’ margin before the shutdown gives you time to check fit and sort anything that’s changed on site.

6. Keep the drawings for next year

Once a part has been programmed, it can be cut again to the same standard. Ask for spares of the parts that fail every year and keep them on the shelf, so the next breakdown doesn’t wait for a fabricator.

What we make for shutdowns

Kaizen Engineering makes machine guards, walkway and platform steelwork and replacement parts to your drawing, sample or measurements, at our works on Thomas Street, Shaw, Oldham, just off the M62. Parts are laser cut on our 8kW Trumpf fibre laser (mild and stainless steel up to 25mm, aluminium up to 12mm), folded on our 250-tonne Bystronic press brake (up to 4m long and 20mm thick) and MIG or TIG welded in our 11,000 sq ft facility. We hold S275 and S355 carbon steel, 304 and 316 stainless and wear plate on site, so many jobs can start without waiting for material. We make finished parts only and don’t sell sheet or plate.

Send your shutdown list for a quote

Email your parts list and drawings to sales@kaizen-eng.com with the material, thickness, quantity, finish and the date you need them by, call 01706 847 172, or use our quote checklist.

Opening hours: Monday to Thursday 7:30am – 4:30pm, Friday 7:30am – 12:30pm.
Kaizen Engineering, Thomas Street, Shaw, Oldham OL2 8PG

Hardox is a trademark of SSAB.

Share this article

News Filters

Use our handy news filters to find what you’re looking for quickly. Search by keyword, category or tag.

Filter blog

Contact us

Thomas Street
Shaw
Oldham
OL28PG

01706 847 172

Call us today on 01706 847 172 or contact us here